Quick Strip


Technical Product Data Sheet

To save product sheet choose
"Save as PDF" option as printer destination.

Description
A quality, chemically-neutral, petroleum based form release agent. OCM Quick Strip reacts with the alkali in the concrete to form a soap film that inhibits the bonding of fresh concrete to the formwork. Forms are ready for re use almost instantly. OCM Quick Strip produces a smooth, void free, architectural concrete surface. VOC compliant.

General Uses
OCM Quick Strip will aid in the release of the form from hardened concrete on the widest range of forming materials.

Features

  • Ensures easy stripping of forms.
  • Produces smooth natural architectural surfaces - chemical action is not harmful to the concrete surface.
  • Will not retard, etch, or soften concrete surfaces, even if over-applied.
  • Run-down is reduced and reinforcing steel stays cleaner.
  • May be used on concrete structures that will store potable water.
  • Has a positive release that keeps forms clean - no cleaning between pours is necessary.
  • Repeated use makes wood forms water-repellent and extends their useful life.
  • Inhibits rust formation on steel forms.
  • Easy to apply
  • No deleterious effect upon the natural bonding characteristics of secondary toppings or coatings, caulks, or sealants.
  • Reduces bug holes and extends the life of most forming materials.
OCM Part No. Bulk
OCMQS275 275 GAL TOTE
OCMQS55 55 GAL DRUM
OCMQS5 5 GAL PAIL

Standards

This product meets the requirements of Corps of Engineers specifications CW 03101, section 2.1.2

Instructions For Use

OCM Quick Strip should be applied in a thin uniform film with a sprayer, brush or roller. No special application equipment is necessary, but a spray application is the most practical. Ponding or puddling is to be avoided.

Specific applications are as follows:

Aluminum, High Density Plywood, Plastic, Steel:
1750 sq. ft. per U.S. gallon
Medium Density Plywood:
1500 sq. ft. per U.S. gallon
BB Grade Plyform:
1000 sq. ft. per U.S. gallon
Plywood & other dimensional lumber:
750 sq. ft. per U.S. gallon

Limitations/Warning

  • Refer to Safety Data Sheet before use.
  • Do not over apply.
  • Do not use as a bond breaker for tilt-up construction.
  • Do not use on Styrofoam or latex molds.
  • Do not use on plaster molds unless coated with a suitable sealer.
  • Colder temperatures will increase the viscosity of OCM Quick Strip.

Contains petroleum distillates. Do not take internally. Do not breathe vapors. Avoid prolonged contact with skin. If swallowed, call physician. If splashed in eyes, wash repeatedly with clean water and call physician. Keep away from heat, sparks and open flame.

Technical Services

OCM Inc. Technical Service Department provides complete product and technical support.

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
[email protected]
Please do not place orders with this email address, it is for informational purposes only.