Speed Lock Ties
Technical Product Data Sheet
Description
OCM SPEED LOCK TIES are used to build wood forming using standard ¾” plyform with 2x4’s for the walers and stiff backs (strong backs).
Features
- The ties feature a self-centering cone that will adapt to imperfect alignment and dimensional variances in the lumber without affecting the break back operation.
- Available in standard sizes and made to order special sizes.
- 2250# safe working load (2:1 safety factor) adjust tie pattern/pour rate according to specific job requirements.
- 13/16th Hole required.
- Uses less lumber and requires less nailing than other typical wood-based hand-set systems.
- Adaptable to most other types of wall forming systems.
- Great for radius forming.
| OCM Part No. | Wall Size | Weight per each lbs | Safe Working Load lbs |
|---|---|---|---|
| SLT-06B | 6" | 0.21 | 2,250 |
| SLT-07B | 7" | 0.22 | 2,250 |
| SLT-08B | 8" | 0.23 | 2,250 |
| SLT-09B | 9" | 0.24 | 2,250 |
| SLT-10B | 10" | 0.25 | 2,250 |
| SLT-11B | 11" | 0.26 | 2,250 |
| SLT-12B | 12" | 0.28 | 2,250 |
| SLT-13B | 13" | 0.29 | 2,250 |
| SLT-14B | 14" | 0.31 | 2,250 |
| SLT-15B | 15" | 0.33 | 2,250 |
| SLT-16B | 16" | 0.34 | 2,250 |
| SLT-18B | 18" | 0.36 | 2,250 |
| SLT-20B | 20" | 0.38 | 2,250 |
| SLT-21B | 21" | 0.39 | 2,250 |
| SLT-22B | 22" | 0.41 | 2,250 |
| SLT-24B | 24" | 0.44 | 2,250 |
| SLT-25B | 25" | 0.43 | 2,250 |
| SLT-26B | 26" | 0.44 | 2,250 |
| SLT-27B | 27" | 0.45 | 2,250 |
| SLT-28B | 28" | 0.46 | 2,250 |
| SLT-29B | 29" | 0.47 | 2,250 |
| SLT-30B | 30" | 0.48 | 2,250 |
| SLT-36B | 36" | 0.53 | 2,250 |
| SLT-38B | 38" | 0.54 | 2,250 |
| SLT-40B | 40" | 0.55 | 2,250 |
| SLT-42B | 42" | 0.62 | 2,250 |
| SLT-44B | 44" | 0.64 | 2,250 |
| SLT-48B | 48" | 0.72 | 2,250 |
| SLT-51B | 51" | 0.73 | 2,250 |
| SLT-54B | 54" | 0.75 | 2,250 |
| SLT-57B | 57" | 0.77 | 2,250 |
| SLT-59B | 59" | 0.79 | 2,250 |
| SLT-60B | 60" | 0.80 | 2,250 |
Comments: SWL provides a safety factor of approximately 2 to 1. Special lengths and Stainless Steel also available.
OCM Limited Warranty
All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.