OCM Logo

Double Waler Bracket


Technical Product Data Sheet

 

Description
Installation:

  1. Fasten Double Waler Bracket to the studs with double headed nails through the three nail holes provided in the bracket.
  2. Insert walers.
  3. Secure with Snap Tie Steel Wedge on the steel pin of the Double Waler Bracket.

Features

  • Eliminates unsafe toenail connections
  • Successfully support, space, and hold in place walers completely independent of wall ties and clamps.
  • Waler lumber can be saved by using this bracket.
  • Normal spacing is 4' on center.
  • Available in two sizes for 2x4's and 2X6's.
  • Galvanized for corrosion resistance
OCM Part No. Size Carton Qty Weight per pcs lbs
WB2X4 2 x 4 25 0.91
WB2X6 2 x 6 25 1
Comments:

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
[email protected]
Please do not place orders with this email address, it is for informational purposes only.