OCM Logo

Mesh Form Snap Tie


Technical Product Data Sheet

 

Description
OCM Mesh Form Snap Tie is deigned for used in one sided forming with wood forming in cast in place applications. The Mesh Form Snap Ties are typically used with OCM Mesh Form.

Features

  • Excellent choice for blind sided forming with Mesh Form.
  • Shipped with Mesh Form Clips ready to use.
  • Available in 8" wall and above with custom end sizes.
  • Available in Loop Tie and Speed Lock Tie versions.
OCM Part No. Wall Size End Size Packaging Weight lbs Safe Working Load lbs
Varies 8" 8-1/4" 100 40 1,875
10" 8-1/4" 100 44
12" 8-1/4" 100 46
14" 8-1/4" 100 48
16" 8-1/4" 100 50
18" 8-1/4" 100 52
20" 8-1/4" 100 54
24" 8-1/4" 100 60

SWL provides a safety factor of approximately 2 to 1.

Easy Installation Instructions:
The Mesh Form Clip should be moved up away from the Snap Tie end. The hook end is than inserted through a precut slit in the Mesh Form and positioned around rebar. The Mesh Form Clip is then slid down the tie and positioned behind the head as shown above. Ensure the Tie Head is secured on the edge of the tie clip to prevent the tie from coming loose.

Comments:

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
[email protected]
Please do not place orders with this email address, it is for informational purposes only.