OCM Logo

Coil Eye Nuts


Technical Product Data Sheet

 

Description
OCM Coil Eye Nuts are made from Ductile Iron and are provided with internal Coil Thread for sizes up to 1 1/2". The OCM Eye Nut is cast from ductile iron that meets ASTM Standard A-536 Grade 80-55-06. The eye nut is cast with coil threads and is intended to be used with Coil Rod that has been cut to the proper length. These Coil Eye Nuts are designed to only be used in straight tensile loading only. Pulling or Lifting at an angle will result in greatly reduced Safe Working Loads and is not recommended.

Features

  • Can be used with preset Coil Thread Inserts to left and move concrete pieces
  • Can be made into any length bolt by using cut pieces of Coil Rod, must be done by certified welder
  • Made from Ductile Iron
OCM Part No. D Size H Height Weight per pcs lbs Safe Working Load lbs
50CEN 1/2" 3-1/4" 0.7 2,700
75CEN 3/4" 3-1/2" 1.2 3,600
100CEN 1" 5" 2.9 7,200
125CEN 1-1/4" 6-1/4" 6 10,800
Comments: SWL provides a safety factor of apporoximately 2 to 1.

OCM Limited Warranty

All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.

OCM, Inc.

1120 E. Peterson Road, Grayslake, IL 60030
Toll Free: 866-457-5710 • Phone: 847-462-4258 • FAX: 847-462-4259
[email protected]
Please do not place orders with this email address, it is for informational purposes only.