BOB Wall Plate Assembly
Technical Product Data Sheet
Description
The OCM Wall Plate Assembly is a product that allows for direct attachment of an OCM standard, deep, junior, or short bracket to an insert that has been cast into a precast concrete beam or other concrete structure. The wall plate assembly has two pieces, the mounting wall bracket with pipe and the serrated washer for final adjustment. Both pieces are manufactured with machine threads on their face to limit the amount of vertical adjustment of the bracket. To attach the wall plate to the bracket, remove the rear ½” hex bolt, nut, and spacer pipe from the horizontal channels of the bracket and replace with the mounting wall bracket. Reuse the ½” hex bolt and nut to complete the installation of the mounting wall bracket to the overhang bracket. Next, position the mounting wall bracket over the insert in the concrete structure followed by the serrated washer. Finally, use a ¾” bolt to connect wall plate assembly to the insert in the concrete structure.
CAUTION: Proper care and precaution must be taken using this product. Product must be visually inspected for any damage before and after every use. Please discard if any damage is visually evident. Only to be used with OCM bolts provided.
Features
- Made from High Strength Steel.
- Used to mount OCM's Bridge Overhang Bracket.
- Easy install.
| OCM Part No. | Weight per pcs lbs |
|---|---|
| WPLT-ASSY | 1.65 |
| WPLP-WASHER | 0.40 |
Comments: 4,500 lbs safe working load with a 2:1 safety factor.
OCM Limited Warranty
All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.