BH60 Type #1A Pres - Steel Angle Hanger
Technical Product Data Sheet
Description
OCM BH60 Type #1A Exterior Hangers are manufactured with a 1/2" diameter 45 degree End Clip and a 1/2" diameter 90 degree End Clip welded at each end of the 0.375" diameter wire strut and is used to support fascia overhang formwork. This hanger allows for installation and adjustment from the top of the formwork.
Features
- SWL provides a Safety Factor of approximately 2:1
- Please specify flange width and finish (Plain or HDG) when ordering
- WARNING: Only to be used to support Overhang Brackets when weight of finishing/conveyor machine is supported directly on exterior beams and hangers must be equally loaded on both sides
| OCM Part No. | Diameter | Safe Working Load lbs |
|---|---|---|
| BH60-1A | 1/2" | 3,800 |
Comments:
OCM Limited Warranty
All recommendations, statements and technical data contained herein are based on tests we believe to be reliable and correct; however, accuracy and completeness of said tests are not guaranteed and are not provided as an express or implied warranty. User shall rely on his or her own information and tests to determine suitability of the product for the intended use and user assumes all risk and liability resulting from his or her use of the product. In the event that a product supplied by OCM, Inc. proves to not meet the OCM, Inc. published dimensional or other specifications of the product, an OCM, Inc. representative will review such product and circumstances to determine whether a replacement is warranted. OCM, Inc.'s and its manufacturer's sole responsibility shall be to replace, at OCM, Inc.'s sole discretion that product or portion of the product which OCM, Inc. deems to be defective, within six months of the delivery of the product. OCM, Inc. disclaims all other warranties or conditions, whether express or implied, including an implied warranties of merchantability or fitness for any particular purpose. In no event shall OCM, Inc. or its parent or affiliated companies be liable for delay caused by defects, for loss of use, or for any indirect, incidental, special, or consequential damages or for any charges or expenses of any nature whatsoever. In no event shall OCM, Inc.'s liability exceed the purchase price paid for the particular affect OCM, Inc. products.